2 in 1 Q Switch Fractional CO2 Laser for Skin Rejuvenation Anti-Aging Wrinkle Removal Machine Rf Co2 Fractional Laser Machine
rinciple
Fractional ablative Co2 resurfacina delivers 10600nm laser in fractional manner into the skin while leavina the untreated surroundina areas intact. laser creates microsconic thermal dot on surface and performs within tissues. offerina improve skin tiahtenina, age spots, fine lines, acne scars. stretch marks removal and vulva reiuvenation. The untreated tissue helps to accelerate the healing process and reiuvenate the skin by promoting microcirculation and new cell genesis.
(2) Q-Switch
Adopting Q-mode, the laser instantly emits high energy to effectively break down pigments in the lesion tissue. That is, the principle of light burst: the high energy gathered by the laser is emitted instantly, which makes the fixed wavelength laser penetrate the epidermis in a very short time (only 6nm) to reach the diseased tissues instantly, and quickly smash the corresponding pigment, and the corresponding pigment group expands extremely fast by heat, and instantly bursts and breaks up, and a part of the (superficial epidermis) pigment group pops out of the body in succession, and a part of the (tissue-based) pigment group breaks up into the fine particles which can be phagocytosed by the macrophage in the body, and is digested by the macrophage, and finally discharged out of the body through the circulation of the lymphatic system. After being digested by macrophages, the pigment will be discharged out of the body through the lymphatic system of the human body, and the pigment of the diseased tissues will gradually become lighter until it disappears, while the surrounding normal skin tissues will not form any damage due to non-absorption of the fixed wavelength laser.
2. Application
(1) CO2 Laser
Remove acne and acne marks.
Eliminate dry pattern, fishtail, etc. around the eyes.
anti-aging: skin firming, wrinkle removal, improve the skin condition.
Treatment of pigmented lesions such as freckles and zygomatic mother spots.
Scar: treatment of depressed, old dispersion, convex vascular / fibrous scar.
Stretch marks.
Improves tissue tone and tightness in the labia externa and inside the vagina, tightens the skin and tissues, improves the tone, softness and moistness of the tissues.
(2) Q-Switch
Effectively treats exogenous hyperpigmentation and endogenous pigmented lesions formed by mixing color pigments.
Remove black, blue, brown and red pigments.
Suitable for treating eyebrows and lip lines.
Tattoo Removal: Removes black, blue, brown and red tattoo pigments from eyebrows, eyeliner, lip lines and other parts of the body.
Eliminates age spots, blemishes, birthmarks and pigment changes.
Product Description
Product Parameters
| Power |
≤1500W |
| Display screen |
12.1inch touch screen |
| Cooling system |
Inside-circle coolant |
| CO2 Laser |
Working mode |
Pulse |
| |
Output power |
1-60W (adjustable) |
| |
Laser wavelength |
10.6μm |
| |
Divergence angle |
4mrad |
| |
Focused spot diameter |
≤0.4mm |
| |
Tool bit focus |
F=100mm (optional) |
| |
Pulse width |
0.1ms-10ms |
| |
Aiming beam |
Red diode laser (650nm, 2mW) |
| |
Transmission system |
7 joint arms |
| |
Preheating-time |
>5min |
| Q-Switch |
Wavelength |
1064nm; 1024nm; 755nm; 532nm |
| |
Output Power |
100 - 2500mJ |
| |
Spot Size |
3mm |
| |
Frequency |
1-10Hz |
| Working environment temperature |
5-40ºC |
| Air pressure / Humidity |
86Kpa-106 Kpa /<80% |
| Electromagnet |
No electromagnet interrupt |
| other working environment |
No obvious shaking or airflow |
| N. W./G. W. |
50kgs/70kgs |
| Package Size |
115cm×54cm×54cm; 69cm×22cm×10cm (Laser Arm) |
The wavelength of CO2 laser is 10.6μm, which can be fully absorbed by human biology tissue (all the skin are available). The sealed-off fractional CO2 laser, whose output laser-light will be transferred by articulated arm, which has better sense of direction and higher energy density.
The CO2 laser operates in the invisible infrared waveband, and an aiming beam is required to see where the treatment beam will impact tissue more recently from a visible red diode laser. When the laser beam go through the focus lens, the produced heat will gasify the target tissue.
With fractional laser resurfacing the laser beam is broken up or fractionated into many small micro beams which are separated so that when they strike the skin surface small areas of the skin between the beams are not hit by the laser and left intact. These small areas of untreated skin promote a much more rapid recovery and healing with less risk of complications. The small areas treated by the fractional micro beams, called micro treatment zones, cause sufficient laser injury to promote new collagen production and resultant facial skin rejuvenation.
Detailed Photos
Application
(1) Remove acne and acne marks;
(2) Eliminate dry pattern, fishtail, etc around the eyes;
(3) anti-aging: skin firming, wrinkle removal, improve the skin condition;
(4) Treatment of pigmentary lesions such as freckles and ostrum miracles;
(5) Scar: treatment of depressed, old dispersion, convex vascular / fibrous scar;
(6) Stretch marks.
Our Advantages
https://membercenter.made-in-china.com/productmanage.do?xcase=view&prodId=OwdGCnIlkQWN
Feedback
FAQ
Q1. When will the machine be delivered to me?
A: We will make delivery within 7-15 days, after payment is made. chilly huang +86 18307537901
Q2. Do you provide training services?
A: We provide online training services, after training, we will send you a certificate.
Q3. What if the machine breaks down?
A: Under warranty, we will send you free components, the machine is module-designed. Every part is easy to replace.
Q4. What about guarantee?
A: 1.5 years for machine body, 1 year for handle. Under guarantee if the handle breaks down, we will send you a new handle.
any question contact chilly huang
Audited Supplier 
){kind=link}