Picosecond Laser Freckle Removal Skin Rejuvenation Beauty Machine
Product Parameters
| Input Power |
2000W |
| Screen |
10.4inch touch screen |
| Cooling System |
semiconductor, water cooling |
| Voltage |
110V/220V |
| Wavelength |
1064nm, 1024nm, 755nm, 532nm |
| Frequency |
1-10Hz |
| Fruence |
200-2000mj |
| Spot Size |
2-10mm(adjustable) |
Product Description
Using the light blasting effect, the high-intensity laser penetrate the epidermis and can reach the pigment clusters in the dermis layer. Because the energy has a short time of action and the energy is extremely high, the pigment clusters will quickly expand and explode after absorbing the high energy in an instant. After the particles are swallowed by macrophages, excreted, and the pigment gradually fades and disappears.
The picosecond laser with ultra-short pulse width can effectively produce photo-mechanical effects and break the pigment particles into small fragments.
Compared with nano-scale Q-switched laser, picosecond laser only needs lower energy to achieve the effect.
It takes less number of treatment courses to achieve better treatment effect.
Stubborn green and blue tattoos can also be effectively removed.
Treated but incomplete tattoo removal, picosecond laser can also treat.
In the mechanism of pigment particle destruction, there are mainly photothermal and photomechanical effects. The shorter the pulse width, the weaker the effect of converting light into heat. Instead, the photomechanical effect is used, so picoseconds can effectively crush the pigment particles, resulting in better pigment removal.
Detailed Photos
Application
Remove chloasma, freckles, age spots, brown mole spots, acne marks and other endogenous pigments, wash eyebrows, tattoos, moles, birthmarks, remove Ota moles, etc.
Function
Washing Eyebrows
During the treatment, the customer should keep his eyes closed. The operator selects the required laser energy according to the color depth of the treatment area (adjust the energy value, the recommended energy value for the new machine is 35%), and slowly move the handle from the normal skin near the treatment area to the treatment area to let the customer has a psychological acceptance process. At this time, the frequency can be set to 3Hz, and the head is 1-2 fingers away from the treatment area. The treatment can be performed from the end of the eyebrow or the eyebrow. If there is a phenomenon of color reversion within 5-10 minutes after treatment, it can be washed again. Re-examination after one and a half months, if the pigment has not faded, the second treatment can be performed(If the color becomes light and does not absorb energy, it can be operated with activated carbon liquid to help absorb energy).
Tattoo Removal
The frequency can be set to 3Hz-5Hz, and the distance between the tip of the handle and the treatment area is 3-4 fingers, and the treatment is performed with high energy as close to the focus point as possible. Common black and blue tattoo, choose 1064nm wavelength, in case of red or coffee, choose 532nm wavelength, the treatment interval is 45-90 days, and the treatment is cycled until it is washed (if the color becomes light and does not absorb energy, it can be operated with activated carbon liquid. To help absorb energy).
Freckle Removal
Facial freckle can be treated with activated carbon. The frequency is set to 3Hz, the recommended energy is 60%-80%, and the 1064nm wavelength is used. The head is 40cm away from the skin for treatment. After finishing the whole face, if there are some areas with heavier spots, you can skip the activated carbon and use the focus energy, but there should be no bleeding, just slightly red. About 7 days after the operation, if the color becomes darker, it is recommended to use a depigmentation cream to help decompose the pigment. (Focus: the point with the loudest blasting noise.)
Mole Removal
The frequency can be set to 3Hz-5Hz, and the distance between the head and the treatment area is 3-4 fingers, and the treatment is performed with high energy as close to the focus point as possible. Choose 1064nm wavelength, the treatment interval is 45-90 days, and the treatment is cycled until it is washed (if the color becomes light and does not absorb energy, it can be operated with activated carbon liquid to help absorb energy).
(3) Treatment Course
Treatment Times
The general cases must be treated multiple treatments to obtain more ideal effects. Treatment times of specific patient is determined by factors the concentration, depth, and pigment of the patient, the laser dose used each treatment, the case of macrophages absorb pigment particles in the body, etc. Generally, exogenous pigments must be treated more than 3 times, and endogenous pigments must be more satisfactory 5 times, and a few patients are still not ideal.
Treatment Interval
The interval should be about two months, so that the crushed pigment particles are sufficiently absorbed.
Before And After
Q & A
Q: Is it painful during treatment? How long does it take?
A: The treatment process will be hot, and the place in which the pigment distribution will feel will more apparent. According to the treatment of the adaptation, the operator will recommend the use of local anesthetic ointments and cold blowers to reduce discomfort. General treatment time is approximately 5-15 minutes, subject to the size of the treatment area and skin problems.
Q: It has been treated many times. Will it leave scars if continue treatment?
A: The technology only needs to use generally laser doses to achieve effective treatment, tissue accepts lower dose stimulation, and the traumatic is relatively reduced, and it is not easy to generate wounds to cause scars.
Q: Is the pico laser washing tattoo good? Will it stay?
A: The current efficacy is particularly remarkable to use the pico laser to wash tattoo, which does not cause heat damage to the surrounding tissue, so it will not leave scars.
Q: Will there be anti-black problems with picosecond laser treatment?
A: Pico laser utilizes the focus energy probe of "honeycomes instant lens", can reduce tissue excessive stimulation, plus the instantaneous high energy of the pico laser (Q-switch) to crush the pigment particles, decrease heat injury, protect tissue melanocytes from excessive stimulation, which can significantly reduce the stimulation of normal cells and lengthy flush.
){kind=link}