Wrinkle Removal Skin Resurfacing Beauty Machine CO2 Fractional Laser Machine Vaginal Rejuvenation Machines

Product Description

 

Working Theory

The CO2 laser is a gaseous laser with a wavelength of 10.6 μm that is fully absorbed through human biological tissue (all skin available). The sealed-off fractional CO₂ laser, whose output laser-light is delivered through an articulated arm, which has better direction and higher energy density.
The CO₂ laser operates in the invisible infrared waveband, and an aiming beam is required to see where the treatment beam will impact tissue more recently from a visible red diode laser. When the laser beam go through the focus lens, the produced heat will gasify the target tissue.
With fractional laser resurfacing the laser beam is broken up or fractionated into many small micro beams which are separated so that when they strike the skin surface small areas of the skin between the beams are not hit by the laser and left intact. These small areas of untreated skin promote a much more rapid recovery and healing with less risk of complications. The small areas treated by the fractional micro beams, called micro treatment zones, cause sufficient laser injury to promote new collagen production and resultant facial skin rejuvenation.



 Application
(1) Removal of acne, acne pits and acne marks.
(2) Removal of fine lines and dry lines around the eyes, including eyelids and crow's feet.
(3) Anti-aging: skin lifting and tightening, wrinkle reduction, enlarged pores, photo-aging skin improvement. 
(4) Treatment of pigmented lesions such as freckles and ostrum miracles. 
(5) Scars: treatment of depressed, old, raised, vascular/fibrotic scars. 
(6) Stretch marks.



what is picosecond


Parameters

Working Mode	single pulse, continuous pulse, repeated pulse, ultra pulse
Output Power	0-60W (adjustable)
Input Power	450VA
Laser Type	Sealed-off CO2 laser
Laser Wavelength	10.6μm
Divergence Angle	4mrad
Focused Spot Diameter	≤0.4mm
Focal Length of working head	F=75mm (optional)
Pulse Width	0.02-0.99s
Indication Beam	Red Diode Laser (650nm,≤5mW)
Cooling System	Air Cooling
Transmission System	7-Articulation Joint Spring Arm
Display Screen	LCD
Environmental Temperature	5-40ºC
Relative Humidity	<80%
Input power	AC220V±10%, 50Hz
Package Size	76cm×55cm×35cm
G. W.	40kgs

 



Q & A
Q: Is it painful during treatment? How long does it take?
A: The treatment process will be hot, and the place in which the pigment distribution will feel will more apparent. According to the treatment of the adaptation, the operator will recommend the use of local anesthetic ointments and cold blowers to reduce discomfort. General treatment time is approximately 5-15 minutes, subject to the size of the treatment area and skin problems.

Q: It has been treated many times. Will it leave scars if continue treatment?
A: The technology only needs to use generally laser doses to achieve effective treatment, tissue accepts lower dose stimulation, and the traumatic is relatively reduced, and it is not easy to generate wounds to cause scars.

Q: Is the pico laser washing tattoo good? Will it stay?
A: The current efficacy is particularly remarkable to use the pico laser to wash tattoo, which does not cause heat damage to the surrounding tissue, so it will not leave scars.

Q: Will there be anti-black problems with picosecond laser treatment?
A: Pico laser utilizes the focus energy probe of "honeycomes instant lens", can reduce tissue excessive stimulation, plus the instantaneous high energy of the pico laser (Q-switch) to crush the pigment particles, decrease heat injury, protect tissue melanocytes from excessive stimulation, which can significantly reduce the stimulation of normal cells and lengthy flush.

Our factory