Gold Radio Frequency Microcrystal Fractional RF Microneedle Face Care Gold Micro Needle Skin roller Acne Scar Gold RF Machine

• Customization: Available
• Type: RF Equipment
• Theory: RF (Radio Frequency)
• Model NO.: br806
• Application: Salon
• Portable: Non Portable
• Model Number: Br806
• RF Frequency: 2.78MHz
• Temperature: 35-55 Degree
• Microneedles: Stainless
• 25 Needles Length: 1.5/2.0/2.5mm(for Face)
• 49 Needles Length: 2.0/2.5/3.0mm(for Body)
• La Reina Tips: 4 PCS(Eyes,Face,Forehead,Body)
• Power: 300W
• AC Power: AC110V-220V
• Single Treatment Area: 0.5-3.5mm Length
• Machine Size: 42*56*106cm
• Working Conditions: Ambient Temperature 25-35degree
• Humidity: 95%
• Treatment Parts: Wholebody and Face
• RF Source: Fractional Radio Frequency
• Transport Package: Wooden Case
• Specification: 107X56X42 cm
• Trademark: BEIR
• Origin: China
• HS Code: 8543709990
• Production Capacity: 500PCS/Month

Product Description

 Gold Radio Frequency Microcrystal Fractional RF Microneedle Face Care Gold Micro Needle Skin Rollar Acne Scar Gold RF Machine

Theory

(1) Technical Theory

Introduce Israel's most advanced dot matrix radio frequency technology, use matrix needles to penetrate 0.5mm-3.5mm subcutaneously, and at the same time, each pulse emits radio frequency energy through multiple matrix points, which is directly heated under the skin; under the stimulation of matrix needles, subcutaneous produce a large amount of collagen, and use radio frequency to directly heat under the skin(65 degree-75 degree) to repair broken collagen fibers, so as to achieve a better repair effect.

(2) Treatment Theory 
Go deep into the tissue cells under the skin through the treatment port; generate a special 3D energy field, which acts on the elastic fibers and collagen fibers from the inside, activates the collagen and elastic fibers in the dormant state, quickly penetrates into the skin tissue cells, comprehensively reduces scars, and restores the skin elastic, sagging skin begins to appear firm.
Gene recombination fluid: effectively provide growth factors and nutrients needed in the process of skin tissue repair.



USER EFFECT


MORE PHOTO WITH THE MACHINE


Treatment Steps

When doing treatment, the foot switch controls the treatment energy output. (Therapeutic energy output. After stepping on the pedal, release the pedal to hear a beep. The time for the sound is the energy output time.).
After hearing the beep, the second operation can be performed.

LA REINA
Clean the treatment area with warm water.
Smear the gel (sold separately) on the treatment area.
Turn on the machine and adjust to the appropriate parameters; starting from a low profile, energy 83 is generally available, and the highest is 127. Adjust the parameters according to the customer's feeling and skin reaction (reddish heat).
The handle moves from bottom to top according to skin texture. The working head moves slowly on the skin and should not stay on the skin to avoid scalding customers. Because the eye and forehead are less fat, the energy output intensity should be appropriately reduced.
Clean and disinfect the used working head after treatment.

Nursing time: The operation time is 15-25 minutes, one treatment is performed every 15 days, and a course of treatment is ten times.

 Pluma
Cleansing: Before treatment, cleanse the skin and cleanse deeply.
Skin epidermal anesthesia: apply anesthetic to the nursing area for epidermal anesthesia, and wrap it with plastic wrap to improve the effect of the anesthetic (about 30 minutes).
After scraping off the anesthetic, the treatment area can be disinfected with iodophor or geraniol.

 

Treatment Area	Needle Length	Normal Energy
Eyes	1.5mm	Adjusted to 63, maximum energy 95
Forehead	1.5mm; 2.0mm	Adjusted to 63, maximum energy 95
Face and Neck	2.0mm; 2.5mm	Adjusted to 83, maximum energy 159
Abdomen	3.0mm	Adjusted to 84, maximum energy 127

When treating the skin, you can choose a handle switch or a foot switch to control the treatment energy output. After stepping on the pedal or pressing the handle button, release the pedal to hear a beep. The time of the beep is the energy output time. The needle must be pulled out to proceed to the next step after hearing the beep.
The operation on the site of the operation only needs 1 to 2 times, and remember not to repeat it multiple times, which will affect the time of scab removal.
After the operation is completed, the face is cleaned with saline, and medical repair products or sterile facial masks can be applied for sedation Care.

Nursing time: once a month, 3-5 times as a course of treatment.
Note: After treatment, do not touch water for 24 hours. If you want to wipe it, you can wipe it with a disposable cotton swab with saline.

Redness, slight swelling, and fever may appear after treatment.
One day later: fever, redness and slight swelling due to physical fitness.
After 2 to 3 days: peeling, erythema or acne.
After 3 to 4 days: peeling and falling off naturally.



The handle is operated at 90 degrees vertically.










HOW TO OPERATE


our company

Guangzhou Beir Electronic Technology Co., Ltd. is an OEM and ODM leading beauty equipment researcher and manufacturer in Guangzhou of China.   
BEIR values the innovation of technology, high quality, best technical support and satisfactory after-sales service. 
Our products' series including Frozen fat machine, Lipolaser, Skin wrinkles Removal Equipment, Thermacool, Pressotherapy system therapy, IPL, ND YAG LASER, RF Cavitation, Laser Comb, Skin wrinkles Removal machine, 808 diode laser and Dermaroller 

Website:  http://beirbeauty.en.made-in-china.com
            http://beirbeauty.en.made-in-china.com
            http://beirbeauty.en.made-in-china.com

Any questions pls feel free to contact 
Ession Cai
 
Website:  http://beirbeauty.en.made-in-china.com
            http://beirbeauty.en.made-in-china.com
            http://beirbeauty.en.made-in-china.com