10 million Shots 808nm painless diode laser hair removal machine
Working Principle
808nm Diode hair removal machine is freezing through technological innovation, so that the treatment of headto negative temperature, unlike other laser burns the skin, to better protect the skin, hair follicle melanin byspecific wavelength of laser absorption, and the heat exchange to destroy hair follicle, the laser energy canbe shot down into the hair follicles within the hair follicle is destroyed energy decomposition, so that the hairfollicles to stop growing, because the laser energy about 15% of the skin can penetrate the dermis layer, theepidermis and more with melanoma of the hair follicle deep through the heat damage to hair follicle degeneration and atrophy; achieve permanent hair removal results.
3 process of hair removal as follows
origiral hair--
penetrate into the dermis layer--
destroy hair follicles
Features
With Sapphire Crystal on the treatment head that can be used forever without replacement;
Powerful semiconductor cooling, air cooling and water cooling can ensure longer working time.
Water cycle& water temperature checking system and powerful abstractor extend the service life and safety for the machine;
Short treatment time and quick recovery have little effect on patients' daily work.
Advanced flash computer calculater: xenon lamp computer calculater system always show how many flashes you have used.
Easier installation: plug-and-play connectors.
Minimum energy loss: ceramic silver-gilt lumen refelcts diffuse light onto laser rod to produce stronger power
Application
Permanent hair removal of all colors.
Remove unwanted hair on all parts of body.
Hair removal of hairline, lip, whiskers, armpit; body hair and bikini hair removal.
Machine advantages
Fast speed, painless
Works with all skin type
The high average power, low fluence, and high repetition rate, so that the energy is delivered safely for all skin types.
No harm, no side effect.
Less down time, lasting results
Pain free and comfortable
Slowly increase the temperature by constantly moving the handpiece during treatment, the
energy is delivered uniformly, and the patient feel comfortable.
Short treatment
Enables you to treat in only 15-20 minutes.
Friendly software operation
Easy to operate, safety protection
Product show
Handles show
germany laser bars
10 millions shots
808nm wavelength
1200W for machine
Handles with 6 bar:350W
Product technical parameters
The operation interface
English as default language
3 modes for option,usually use fast mode.
FAST MODE:it is FHR (Fast hair removal) mode, this mode is suitable for public treatment, easy to start a treatment, most popular with beautician in beauty salon, spa centers, etc
NORMAL MODE:it is standard hair removal mode, according to the different individual to have a targeted treatment, designed for doctor and professional trained operator use in medical clinic, surgical hospital, etc
Skin Rejuvenation:it is a additional function of skin rejuvenation with low energy shooting to make face smooth, tender and younger.
the power of FHR mode is adjustable from 5-10J/cm2;we recommend start from 5J,then add the power slowly according client's feelings.
accoring the feeling.
the water cooling is default "on" after device running
Cooling on:the water cooling is default "on" after device running
Counter:show current shooting numbers of hand-piece, automatically be cleared at next entry.
NORMAL MODE:
the power changes from 6-50J/cm2
Pulse:pulse means pulse width, changes from 80-200m
Frequency:the frequency changes from 1-5Hz
Cooling on:the water cooling is default "on" after device running
Counter:show current shooting numbers of hand-piece, automatically be cleared at next entry.
Treatment parameter is adjusted by following principles:
Pulse width at 80ms:
Power from 6-20J/cm2 adjustable;
Frequency from 1-5Hz adjustable;
Pulse width at 120ms:
Power from 6-30J/cm2 adjustable;
Frequency from 1-3Hz adjustable;
Pulse width at 160ms:
Power from 8-40J/cm2 adjustable;
Frequency from 1-2Hz adjustable
Pulse width at 200ms:
Power from 10-50J/cm2 adjustable;
Frequency from 1-2Hz adjustable;
Power and Frequency will change based on different pulse width
Skin rejuvenation screen:
At skin rejuvenation screen, it is additional function for face rejuvenation and easy to set parameter: adjust power---press "start"--system becomes to "STOP"and shows "system is ready" at screen bottom---press "button" on hand-piece to start a face treatment.
Power:set power from 1-5/cm2 adjustable;
Cooling:
the water cooling is default "on" after device running;
Counter:
show current shooting numbers of hand-piece, automatically be cleared at next entry.
Cautions: At each treatment function, the cooling is default "ON", PLEASE DO NOT CLOSE IT IN ORDER TO SYSTEM NORMAL WORKING!
Therapy steps:
1.Before do treatment, clean and disinfect the treatment area
2: Shaving hair away:
For better energy transmit to skin, need to shave the exposed hair away
3.Daub cooling gel:
Cooling gel can reduce discomfort during treatment, so before start treatment daub proper cooling gel onto treatment area (normal 2mm thickness)
4.Set parameters for device:
Gradually set pulse width and corresponding power, frequency to achieve the best user experience
5. Hair depilation:
The method to do hair depliation: the hand-piece (sapphire) is stick to skin tightly, and sliding 6-7 times back and forth; during this treatment, observe the changes of skin: if skin no obvious changes,need to increase power until user feels hot and the skin on treatment area appears flushed.
6.Cleaning and Ice compress:
After do treatment, clean again the treatment area, and do ice compress to partial skin for 10-15 minutes if needed; for device, return to menu from treatment screen, turn off device with key switch and clean the sapphire with tissue
Before and After Hair Removal Photos:
Cautions after treatment:
1: After finished treatment, the treatment area will feel slightly scorching hot and skin around hair follicles appears erythema, which is normal phenomenon, do ice compress to partial skin for 10-15 minutes if needed;
2: the residual hair on treatment area can pull out in 24 hours or automatically fall off in several days;
3: The current day of treatment, use low temperature water to wash and use liquid skin care products;
4: After treatment, pay attention to protecting moisture and sunscreen
Cautions before and after therapy:
1: One month before treatment, pay attention to the sunscreen;
2: Two weeks before treatment, the treatment area does not remove hair with plucking out, with cream or electrolysis ;
3: Two days before and after treatment, to avoid chemical or mechanical stimulation;
4: Two weeks before and after treatment, to disable the filling or other injection, etc the kind of interventional therapy.
Therapy periods:
Underarm, Face: One Therapy interval---4-6 weeks;
Arms and legs, body: One Therapy Interval----4-6 weeks;
Treatment Period: 3-5 times
Audited Supplier 
){kind=link}
){kind=link}